LG Electronics Thrill4GUnlocked Cell Phone User Manual


 
48
Taking a 3D photo
Open the Camera application.
1
Slide the 3D Camera Switch to right.
2
Holding the phone horizontally, point the lens towards the subject you want to photograph.
3
Touch and hold the capture button lightly, and a focus box will appear in the center of the viewfinder screen.
4
Position the phone so you can see the subject in the focus box.
5
When the focus box turns green, the camera
6
has focused on your subject.
Release the Capture button.
7
3D camera viewfinder
3D Camera
3D Focus
– You can manually fine-tune 3D focus by adjusting the amount of overlapping.
Before taking a 3D picture, you can use this function.
Brightness This defines and controls of the amount of sunlight entering the lens. Slide
the brightness indicator along the bar, towards “-” for a lower brightness
image, or towards “+” for a higher brightness image.
Settings
– Tap this icon to open the settings menu. The options are similar to the 2D camera
with the addition of 3D focus mode.
3D focus mode
Select the auto 3D focus option from Border and Center. Border
uses a border area for optimizing the amount of overlapping. Center uses a center area
for it. You can also find-tune manually with 3D focus function of viewfinder.
3D Photo size
– Tap to set the size of the 3D photo you will take. Set your 3D photo image
size as 3M, 2M or 1M.
Camera Switch - Allows you to switch between the front-facing and back-facing cameras.