Filter
Top Products
Set up your phone
16
■ Connect the headset
A compatible headset may be included with your
device or purchased separately as an
enhancement. (See "Enhancements," page 71.)
1. Plug the headset connector into the
Pop-Port™ connector at the bottom end of
your device.
2. Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
■ Change Xpress-on™ covers
Before removing the cover, always switch off the power and disconnect the
charger and any other device. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.
Remove the back cover and the battery
See "Remove the back cover," page 14 and "Remove the battery," page 14 for
instructions on removing the back cover and the battery.
Remove the front cover
Gently pull the bottom of the front cover
away from the rest of the device, and
remove the front cover.