Filter
Top Products
Messages
38
•Select Listen if there is a notification message in the display.
• In the standby mode, select Menu > Messages > Voice messages > Listen to
voice messages.
When you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
To automatically access your voicemail messages, you can insert special characters
called dialing codes into phone numbers and save the number to a 1-touch dialing
location. Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Voice mail services vary by service provider. The following instructions are examples
of common operations. Please check with your service provider for specific
instructions for using your voice mail service.
Voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your step-by-step interaction with the recorded prompts. Remember
that each voice mail service varies. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234 and *.
Be precise; you need this information to set up your voice mail with dialing codes.
Dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
* Bypasses a set of instructions.
+ Causes the International access code to be replaced
by
+. This is a carrier-dependent feature.
p Pauses for 2.5 seconds before sending any numbers
that follow.
w Waits for you to press the call key before sending the
numbers or codes that follow.