Filter
Top Products
Settings
56
Change the lock code
Tip: Avoid using codes similar to emergency numbers such as 911 to prevent
accidental dialing of the emergency number.
The lock code controls access to features and is supplied with the device. The preset
lock code is the last four digits of your phone number. When you change the lock
code, keep the new code secret and in a safe place separate from your device.
1. In the standby mode, select Menu > Settings > Security settings > Access
codes > Change lock code.
2. Enter the current lock code (the default is 1234), and select OK.
3. Enter the new lock code (4 characters), and select OK.
4. Re-enter the new lock code for verification, and select OK.
Change the security code
1. In the standby mode, select Menu > Settings > Security settings > Access
codes > Change security code.
2. Enter the current security code (the default is 12345), and select OK.
3. Enter the new security code (5 characters), and select OK.
4. Re-enter the new security code for verification, and select OK.
When you change your security code, make sure you store it in a safe place, away
from your device. Avoid entering access codes similar to emergency numbers to
prevent accidental emergency calls.
Voice privacy
Voice privacy is a network service. See "Network Services," page 7. If your
wireless network operator supports this feature, the voice privacy feature
protects the privacy of your current phone conversation from other callers
placing phone calls on your same network.
In the standby mode, select Menu > Settings > Security settings > Access codes >
Voice privacy > On or Off.
■ Network
The menu options you see in your device are based on your service provider’s
network. The network determines which options actually appear in the device
menu. Check with your service provider for more information.