Filter
Top Products
Menu functions
Copyright © 2004 Nokia. All rights reserved. 53
• To personalise the profile, select
Personalise. Select the setting
you want to change and make
the changes. The same settings
can also be changed in the Tone
settings menu, see ”Tone
settings” on page 53.
To rename a profile, Profile name.
The General profile cannot be
renamed.
• To change your presence status
information, select My presence.
This menu is available if you have
set Synchronise with profiles to
On, see ”My presence” on page
46. Select My availability to
change your availability status
and My presence message to edit
your status message.
Tip: To change the profile
quickly in standby mode,
press the power key ,
scroll to the profile you want
to activate and press Select.
Tone settings
Press Menu, and select Settings and
then Tone settings. You can find the
same settings in the Profiles menu,
see ”Profiles” on page 52. Note that
the settings you make will change
the settings in the active profile.
Select Incoming call alert to choose
how the phone notifies you of an
incoming voice call. The options are
Ringing, Ascending, Ring once, Beep
once and Off.
Select Ringing tone for incoming
voice calls. To select ringing tones
that have been saved in the Gallery,
select Open gallery from the ringing
tone list.
Tip: If you receive a ringing
tone via infrared connection
or by downloading, you can
save the ringing tone in the
Gallery.
Select Ringing volume and Vibrating
alert for incoming voice calls and
messages. The vibrating alert does
not work when the phone is
connected to a charger, a desktop
stand, or a car kit.
Select Message alert tone to set the
alert tone for the incoming
messages, Keypad tones, or Warning
tones to set the phone to sound
tones for, for example, when the
battery is running out of power.
Select Alert for to set the phone to
ring only upon calls from phone
numbers that belong to a selected
caller group. Scroll to the caller
group you want or All calls and press
Mark.