Filter
Top Products
Menu functions
86 Copyright © 2004 Nokia. All rights reserved.
Setting up the phone for a
service
You may receive the service settings
as an over the air message from the
network operator or service provider
that offers the service that you want
to use. You can also key in the
settings manually or add and edit
the settings with PC Suite.
For more information and for the
appropriate settings, contact the
network operator or service provider
that offers the service that you want
to use.
To receive the service settings over
the air, see ”Over the air settings
service” on page 9.
Keying in the service settings
manually
1. Press Menu, and select Services,
Settings and Connection settings.
2. Select Active service settings.
3. Scroll to the connection set you
would like to activate and press
Activate.
You need to activate the
connection set where you want
to save the service settings. A
connection set is a collection of
settings required to make a
connection to a service.
4. Select Edit active service settings.
Select each of the settings one by
one and key in all the required
settings according to the
information you have received
from your network operator or
service provider. Note that all the
bearer-related settings are in the
Bearer settings menu.
Making a connection to a
service
Firstly, make sure that the service
settings of the service you want to
use are activated. To activate the
settings:
• Press Menu, and select Services,
Settings and Connection settings.
Select Active service settings and
scroll to the connection set you
want to activate and press
Activate.
Secondly, make a connection to the
service. There are three ways to
connect:
• Open the start page, for example,
the homepage of the service
provider:
Press Menu, and select Services
and Home, or in standby mode
press and hold .