Filter
Top Products
Menu functions
Copyright © 2004 Nokia. All rights reserved. 57
two devices in an infrared
connection is one metre at most.
• To activate the IR port of your
phone to receive data via IR,
press Menu, and select Settings,
Connectivity and Infrared.
• The user of the sending phone
selects the desired IR function to
start data transfer.
If data transfer is not started within
two minutes after the activation of
the IR port, the connection is
cancelled and has to be started
again.
IR connection indicator
• When is shown
continuously, the IR connection
is activated and your phone is
ready to send or receive data via
its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
(E)GPRS
GPRS (General Packet Radio Service)
is a network service that allows
mobile phones to be used for
sending and receiving data over an
Internet Protocol (IP) -based
network. GPRS is a data bearer that
enables wireless access to data
networks such as the Internet.
EGPRS (Enhanced GPRS), also known
as EDGE (Enhanced Data Rates for
Global Evolution) is similar to GPRS
but the connection is faster. For
more information on availability of
(E)GPRS and data transfer speed,
contact your network operator or
service provider.
The applications that may use
(E)GPRS are MMS, chat and SMS
messaging (SMS, Short Message
Service), browsing sessions, e-mail,
remote SyncML, Java application
downloading and the PC dial-up (for
example, Internet and e-mail).
Before you can use (E)GPRS
technology:
• Contact your network operator or
service provider for availability
and subscription to the (E)GPRS
service.
• Save the (E)GPRS settings for
each of the applications used
over (E)GPRS.
For information on pricing, contact
your network operator or service
provider.
Note that when you have selected
GPRS as a data bearer, the phone
uses EGPRS instead of GPRS if this is
available in the network. You cannot
select between EGPRS and GPRS but
for some applications you may be
able to select either GPRS or GSM
data (CSD, Circuit Switched Data).