Filter
Top Products
Set up your phone
17
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the
end key for at least 3 seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as HS-5, may
be purchased with your phone or separately
as an enhancement. See "Enhancement
settings," p. 77 for information.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone. appears on
the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
You can also plug a compatible headset, the such as the HS-9 Universal Headset,
into the 2.5 mm stereo headset jack on the side of your phone to allow hands-
free operation. See "Enhancement settings," p. 77.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your safety.
■ Make calls
Using the keypad
1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.
2. To end the call, press the end key. To cancel the call attempt, select End call.
Use the save contact option
1. In the standby mode, enter the phone number (including the area code) and
select Save, enter a name for the contact, and select OK.
2. To make the call, press the call key. To return to standby mode, select Done.