Filter
Top Products
Messaging
48
1. In the standby mode, select Menu > Messaging > Voice messages > Voice
mailbox number.
2. If the number is not displayed or incorrect, enter your voice mailbox area code
and number.
3. Select OK.
Call and set up your voice mail
1. After you save the voice mailbox, in the standby mode, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to set up your voice mail.
Listen to your voice mail
After you set up voice mail, you can dial the number in one of four ways:
• Dial the number using the keypad.
• Press and hold 1.
•Select Listen if there is a notification on the display.
• In the standby mode, select Menu > Messaging > Voice messages > Listen to
voice messages.
When you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Note
that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
and press *.
Be precise; you will need this information in "Set up voice mail with dialing
codes," p. 49.