Filter
Top Products
Settings
71
Help text activation
Your phone displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 15 seconds and wait for the help text to display.
Scroll to page through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
In the standby mode, select Menu > Settings > Phone > Help text activation >
On or Off.
■ Voice commands
You can set up to five Voice commands, which allow hands-free operation of
certain phone features.
Add a voice tag
Before using Voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Settings > Voice commands.
2. Select a function option you wish to tag, and select Add.
3. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag. appears next to the function
option for which you add a voice tag.
Activate a voice command
After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names.
2. When Speak now appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice command tag, Found: appears, and the phone
plays the recognized voice command tag through the earpiece. The function you
requested is activated.
Voice command options
You can modify voice command tags. In the standby mode, select Menu >
Settings > Voice commands, highlight the voice command tag, and select
one of the following options:
Play—Listen to the voice command tag.
Options > Change—Change the voice command tag.
Options > Delete—Erase the voice command tag.