Nokia 6265i Cell Phone User Manual


 
Settings
76
Enable default mode connection
Connect to your PC in Default mode to transfer phone data and files between
your phone and PC using Nokia’s PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Default mode. A notification appears on the display stating a
connection is active.
You can now use PC Suite to connect to your phone.
Enable data storage connection
Connect to your PC in Data storage mode to transfer music, photo, and video files to
the phone miniSD card, and from the phone miniSD to your PC with Windows Explorer.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Data storage. The notification Data storage mode displays
while the phone is in data transfer mode.
3. Open Windows Explorer. Your phone miniSD card will appear as a local drive
(named by Nokia 6265i), and with a drive letter assigned to it.
4. Click on the folders to display a window that shows the contents of the folder
on the phone miniSD card.
5. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have MP3 files, photo files, or video files stored.
6. Select the files on your PC that you wish to transfer to the phone.
7. Drag and drop the files from the second window into the first window and
place in a folder.
8. The files are transferred to the phone and can be played by the Music player,
or accessed by the Media player.
If you selected a file or files that require more memory than can fit on the available
phone memory, you will get an error note. Deselect some of your selected files until
the required memory is less than or equal to the available memory on your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the task bar at
the bottom of your PC screen.
A window pops up that shows Unplug or Eject Hardware.
2. Click on USB Device in the Hardware devices window.
A popup window shows Stop a Hardware device.