Filter
Top Products
Settings
75
To view the transferred item immediately from standby mode, select Show. To
view the item at a later time, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu in your
phone. For example, a business card would be saved in Contacts, and a calendar
note would be saved in Calendar.
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, transmission and reception must be to or from an IR compatible
phone or device.
Warning: Do not point the IR beam at anyone’s eye or allow it to
interfere with other IR devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.
2. To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.
3. The user of the other device should activate IR as well.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be restarted.
Connection indicator
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.
Data cable transfer
You can transfer data from your phone to a compatible PC, or from a compatible PC
to your phone using a CA-53 USB data cable. To activate the USB data cable connect
the USB cable and select Menu > Settings > Connectivity > USB data cable
Important: Disconnect the USB data cable from the phone to make a call.