Filter
Top Products
121
©2000 Nokia Mobile Phones. All rights reserved.
3 Before any data is removed, you must enter your lock code. See ”Security”
on page 113. When removing calendar data, you can choose to remove all
calendar data or only events that occur before a given date.
Install/Remove software
The Install/Remove software application enables you to install new software
from a PC to the communicator and later remove the software.
To use this application, you need to start the Nokia Communicator Server on
your PC and connect your communicator to the PC. See ”To use the Nokia
Communicator Server” on page 36.
Press Install and select the software you want to install, or press Remove and
select the software you want to remove.
The set of applications that were on the communicator at the time of
purchase cannot be removed. This is to ensure that the basic functions of the
communicator are always available.
Backup/Restore
The Backup/Restore application enables you to make backups of various data
on your communicator, and to restore it later. Data is backed up in sets which
are stored in separate directories on the PC.
To use this application, you need to start the Nokia Communicator Server on
your PC and connect your communicator to the PC. See ”To use the Nokia
Communicator Server” on page 36.
Note: Even if you choose the All device data
option, your Internet settings will not be removed.
If you want to restore your communicator to the
same state it was in at the time of purchase, see
chapter 15 "Troubleshooting" on page 151.
Caution: Beware of viruses! Only install on the
Nokia 9110i Communicator software you have
obtained from sources that offer adequate
protection against viruses.
Tip: To save the memory space of
the communicator, you can install
software to a memory card.
Um_spock3.bk Page 121 Thursday, June 1, 2000 10:11 AM