Filter
Top Products
Tools
113
Copyright © 2005 Nokia. All rights reserved.
Call diverting
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
1 Press , and select Tools > Settings > Call divert.
2 Select which calls you want to divert: Voice calls, Data
and video calls, or Fax calls.
3 Select the desired divert option. To divert voice calls
when your number is busy or when you reject incoming
calls, select If busy.
4 Set the divert option on (Activate) or off (Cancel), or
check whether the option is activated (Check status).
Several divert options can be active at the same time.
When all calls are diverted, is shown in the standby
mode.
Call barring and call diverting cannot be active at the same
time.
Call barring
Call barring allows you to restrict the calls that you make
or receive with the phone. To change the settings, you need
the barring password from your service provider. Select the
desired barring option, and set it on (Activate) or off
(Cancel), or check whether the option is active (Check
status). Call barring affects all calls, including data calls.
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls still may be possible to certain
official emergency numbers.
Network
Your phone can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode (shown only if supported by the
operator)—Select which network to use. If you select Dual
mode, the phone uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic to set the phone
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have