Filter
Top Products
Messaging
68
Copyright © 2005 Nokia. All rights reserved.
language options like Chinese, take up more space
limiting the number of characters that can be sent in a
single message. In the navigation bar, you can see the
message length indicator counting backwards. For
example, 10 (2) means that you can still add 10 characters
for the text to be sent as two messages.
Note: E-mail messages are automatically placed in
Outbox before sending. If sending does not succeed,
the e-mail is left in the Outbox with the Failed status.
Tip! In Messaging you can also create presentations
and send them in a multimedia message. In the
multimedia message editor view, select Options >
Create presentation (shown only if MMS creation
mode is set to Guided or Free). See ‘Multimedia
messages’, p. 74.
Tip! When you send a multimedia message to an
e-mail address or a device that supports the receiving
of large images, use the larger image size. If you are
not sure of the receiving device, or the network does
not support sending large files, it is recommended that
you use a smaller image size or a sound clip that is no
longer than 15 seconds. To change the setting, select
Options > Settings > Multimedia message > Image
size in the Messaging main view.
Receive MMS and e-mail settings
You may receive the settings in a text message from your
network operator or service provider. See ‘Data and
settings’, p. 69.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually:
1 Select Tools > Settings > Connection > Access points,
and define the settings for a multimedia messaging
access point. See ‘Connection settings’, p. 107.
2 Select Messaging > Options > Settings > Multimedia
message > Access point in use and the access point
you created to be used as the preferred connection. See
also ‘Multimedia messages’, p. 74.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection settings’, p. 107.
• Define your e-mail settings correctly. See ‘E-mail’, p.
75. You need to have a separate e-mail account. Follow
the instructions given by your remote mailbox and
Internet service provider (ISP).