Filter
Top Products
Make calls
34
Copyright © 2005 Nokia. All rights reserved.
Tip! You can assign a ringing tone for video calls.
Press and select Tools > Profiles, select a profile
and Options > Personalise > Video call tone.
In the Fold open mode, press to answer the video call.
To start sending video, activate the Imaging mode, and a
live video image, recorded video clip, or the image being
captured by the camera in your device is shown to the
caller. If you want to send a live video image, turn the
camera unit to the direction from which you want to send
the video image. If you do not activate the Imaging mode,
video sending is not possible, but you can still hear the
other person. A grey screen is shown in place of the video.
To replace the grey screen with a still image, see ‘Call
settings’, Image in video call, p. 106.
Tip! To send video of yourself, in the Imaging mode
turn the camera unit so that the lens is facing you.
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera
is not active. You can, however, still see the video of the
recipient.
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
To end the video call, in the Imaging mode or in the Fold
open mode, press .
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press . To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached), End active call
or End all calls, New call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant