Filter
Top Products
122
Connect
Connect
Menu > Connect > Bluetooth
®
Select On/Off.
Select On or Off.
If Bluetooth
®
is active and you choose to turn it off, you are prompted to confirm the
disconnection.
Discovering and Pairing devices
To use your Bluetooth
®
headset or car kit with your phone to make voice calls or to use
your Bluetooth
®
enabled laptop to connect to the Internet you must Pair them with your
phone. You only need to do this once for each device, thereafter your phone remembers
these devices and stores them in its Paired Devices list. Your phone can be Paired with
up to ten devices.
Select Discover & Pair.
This lists all Discoverable Bluetooth
®
devices within about 10 metres.
When the device appears in the list, select Stop.
Highlight the device in the list.
Select Pair.
Enter the Bluetooth
®
Passkey.
If the device you want to pair with is not listed then check that it is Discoverable. Some
Bluetooth
®
devices are not Discoverable even if they are within 10 metres range. Most
Bluetooth
®
headsets and car kits must be put into Discoverable mode. This is a security
feature to prevent other Bluetooth
®
devices from Pairing with your headset or car kit.
The pairing will fail if you enter the wrong Passkey. Most Bluetooth
®
headsets and car
kits use a fixed 4 digit Passkey, e.g. the Passkey for the Panasonic EB-BHX70 headset is
0000. For other devices such as a PC, laptop or another mobile phone that don’t use a
fixed Passkey enter the same Passkey on both devices. This can be anything from 1 to 16
digits long.
Note: You can send and receive pictures, sounds, themes, contact details and other data
when Bluetooth
®
is off. Your phone automatically switches Bluetooth
®
on while
the transfer is taking place, then switches it off when the transfer is complete.
Note: Some manufacturers may use the term PIN, Password or Passcode instead of
Passkey.
Your phone only supports Passkeys that use numbers not letters.