Filter
Top Products
111
Settings
Pairing with other devices
Before you can transfer information between two Bluetooth devices,
they need to find each other and set up a connection. This is
referred to as “pairing”.
Ensure that the device in which you want to pair is switched on, and
its Bluetooth setting is activated.
d Main menu > Settings > Connectivity > Bluetooth > Paired
devices
1. “No paired device add new device?” 7 [5] (Ok)
The phone begins searching for devices and notifies you when it finds
the other device
2. [192] to scroll to the required device
3. [5] (Options) 7 Select Pair device
4. Enter the Pass key, if requested 7 [5] (Ok)
You may need to enter Pass keys on the both sides of connecting
devices
5. “Make device trusted?” 7 [5] (Yes)
Note: The Pass key may be between 1 and 16 digits except where stated
in the connecting device (normally headset) instructions when a 4 digit Pass
key is specified.
Making the device “trusted” on step 5 can cause future connections to occur
without notice. This may enable trusted devices to access your Contacts list
and data folders without prompting. You are advised to “trust” only your own
devices to avoid being prompted each time a call is received.