Philips CTX503WHT/00 Cell Phone User Manual


 
12 Getting Started
damage the battery. The only way to turn off the
charger is to unplug it, so it is advisable to use an
easily accessible power socket.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If the
battery is completely flat, the battery symbol will
only reappear after a few minutes of charging.
Mode settings
Once you switch on the phone, you need to set
Mode settings.
1.
Check the Slot 1 and Slot 2 for the SIM
cards (see Step 3 in "Inserting the SIM
card").
2.
Check that your phone is switched on.
Long press ) if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-
digit secret code of your SIM card. It is
preconfigured and communicated to you by
your network or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
3.
The Mode settings screen displays. Press +
or - to select:
Dual SIM open: Set SIM1 and SIM2 to idle
mode.
Only SIM1 open: Only use SIM1 to make/
receive calls and send/receive messages.
Only SIM2 open: Only use SIM2 to make/
receive calls and send/receive messages.
4.
Press
,
Select to confirm.
Set clock
1.
Check that your phone is switched on.
2.
On idle screen, press
,
Menu and go to
Settings > General >Time and date.
Set format: Select the time (12-hour or 24-