Filter
Top Products
Tools 39
To change the ringtone, see "Adjusting ring
settings to different scenes" on Page 61.
Using your clock and timer
Alarm
You can set up to five alarms.
To set an alarm
1.
Check that your clock is correctly set (see
"Set clock" on Page 12).
2.
Go to Tools > Alarm.
The screen of alarm list appears.
3.
Select an alarm, and press ,Edit to enter
the alarm setting screen.
On/Off: Press < or > to turn the alarm on or
off.
Time: Set the alarm time.
Repeat: Repeat the alarm on one or some of
the weekdays or weekends. Or select
Customize, press - and < or > to select a
certain days, and then press L to select
or unslect the day.
Audio options: Select an alarm tone: Ringer or
FM radio.
To use ringer as the alarm tone, press -,
and then LOptions to select a ringtone;
To use FM radio as the alarm tone, press -,
and then LOptions to select a preset
station in Channel List, or enter a radio
station frequency in Manual Input.
Snooze(Mins): Select an alarm interval:
Default (5 minutes), or 1 - 10 minutes.
Alert type: Select how the alarm sounds at
the set time.
4.
Press ,Done when you finish setting the
alarm.
To use an alarm
On the set alarm time, your alarm sounds.
Select Stop: The alarm stops. If you have selected
repetition mode for the alarm (see "To set an
alarm" on Page 39), it will sound again at the set
time.
Select Snooze: The alarm will sound again after
the set Snooze(Mins) interval.