Philips DECT 627 Cell Phone User Manual


 
Clock & Alarm
26
Browse through the options Off, On Once, On Daily and select the appropriate
setting.
If you select On Once or On Daily :
Enter the time and press SELECT.
By default the alarm is off.
To set the alarm clock ON/OFF
Scroll to Alarm and press SELECT.
Press to reach the menu list.
When the alarm is set to On Once or On Daily, an alarm icon is shown in idle mode in
the display headline.The alarm tone rings for 1 minute at the most. Press STOP or any key
to switch off the alarm and return in idle mode.
Clock & Alarm
Date & Time
Alarm
Alarm Tone
Scroll to Clock & Alarm and press SELECT.
Press to reach the menu list.
Press SELECT to confirm.
To set the date and time (of the handset and base station)
Date & Time
Enter the current time (HH:MM).
After setting, the date and time are shown in idle mode.
Press to select Date & Time.
Enter the current date (DD/MM).
Warning : If your phone is connected to an ISDN line through an adaptor, the date & time may be
updated after each call. Please check the date & time settings in your ISDN system. Please contact your
network provider (see FAQ page 52).
Alarm
Scroll to Clock & Alarm and press SELECT.
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 26