Filter
Top Products
Advanced Settings
41
Adv. Settings
Dial Mode
Flash Time
Voice Lang.
Security
Registration
Unregistration
Reset
Press to select Dial Mode.
Scroll to Adv. Settings and press SELECT.
Press to reach the menu list.
To change the dial mode
Dial Mode
Browse to select Tone or Pulse and press SELECT.
By default your phone is pre-configured with the country dependent settings and you do not
have to change them.
Note :This setting allows you to select pulse dialling (also called “Loop disconnect” which is used in
countries without DTMF tone dialling capability or when using old PABX).
Scroll to Flash Time and press SELECT.
Scroll to Adv. Settings and press SELECT.
Press to reach the menu list.
To change the flash time
Flash Time
Browse to select Short or Medium or Long and press SELECT.
This setting is useful when using operator services.
Note :The use of some operator services accessed with + , + and + (call
waiting, call forward ...) will depend on the flash setting according to your installation type (ISDN, Public,
PABX).
DECT623_627_GBIE_part2.qxd 14.07.2005 16:06 Seite 41