Philips DECT 627 Cell Phone User Manual


 
Answer machine DECT 627
46
The Remote access code is activated.
New unread message(s) on answer machine.
Old message(s) on answer machine, already read.
The answer machine is ON.
Indicates the type of outgoing message.
Indicates the number of rings before the answer machine will start playing the
outgoing message.
Call screening ON
The display of the DECT 627 answer machine gives information about the answer machine and
the settings.The date and time setting of the base is done simultaneously when setting date &
time on the handset (see page 26).
Date (DD / MM)
Time (HH : MM )
Number of messages
DECT 627 answer machine display
To switch the DECT 627 Telephone Answer Machine ON/OFF
When it is switched ON, the selected outgoing message is automatically played.The answer
machine display backlight will also be lighted if there is (are) one or more new unread
message(s).
Press ON/OFF key on the base to switch the answer machine ON or OFF.
When the answering machine is ON, it will answer the call after a certain number of rings
depending on the setting (see page 48).After answering the call, the answering machine will play
your welcome message and record the message left by the caller, if any.
Saved messages
To listen to new message(s)
The LCD backlight is ON and the base display shows that there is one or more new
message(s) : 3 .
Messages are always played in chronological order, the oldest new message first.
The message counter and the date and time of recording will be shown on the display.
setting/ ok
Press to start playback.
Press to skip back to the previous message or replay current message.
Press to skip forward to the next message.
During message playback, the following functions are available :
setting/ ok
Press to stop playback and press again to continue playback.
Call screening OFF
Note : If there is no more memory keep, two bars on the display will kept flashing and the base LCD
backlight will be ON continuously. Delete old messages (see page 47) to free space for the new one.
DECT623_627_GBIE_part2.qxd 14.07.2005 16:06 Seite 46