Filter
Top Products
Web Application for Polycom Phones UC Software 5.0.0
Polycom, Inc. 75
Configuring Push Request Parameters
The <apps.push/> parameters are used to control push server controls. Requests sent to the phone’s
push server must be in the format of http://<Phone IP>/push. The push control request parameters
are listed in the following table.
Table 62: Push Request Parameters
Parameter
Permitted Values
Default
apps.push.alertSound
0 or 1
0
If 0, there is no sound when an alert is pushed. If 1, there is sound.
apps.push.messageType
0 to 5
0
Set which push priority messages should display on the phone. The possible values are:
0: (None) Discard push messages
1: (Normal) Allows only Normal priority push messages
2: (Important) Allows only Important priority push messages
3: (High) Allows only High priority push messages
4: (Critical) Allows only Critical priority push
5: (All) Allows all push messages of any priority
apps.push.password
string
null
The password to access the push server URL.
apps.push.secureTunnelEnabled
0 or 1
1
If 0, the Web server is not connected through a secure tunnel. If 1, the Web server is connected through a secure
tunnel.
apps.push.secureTunnelPort
1 to 65535
443
The port that the phone uses to communicate to the Web server when the secure tunnel is used.
apps.push.secureTunnelRequired
0 or 1
0
If 0, communications to the Web server do not require a secure tunnel. If 1, communications require a secure
tunnel.
apps.push.serverRootURL
URL
null
The application server root URL. The relative URL received from the HTTP push message is appended to this
root URL, and the combined URL is sent to the microbrowser.
For example, if the application server root URL is http://172.24.128.85:8080/sampleapps and the relative URL is
/examples/sample.html, the URL that is sent to the microbrowser is
http://172.24.128.85:8080/sampleapps/examples/sample.html. Can be either HTTP or HTTPS.
apps.push.username
string
null
The user name to access the push server URL.
Note: To enable the push functionality, the parameters apps.push.username and apps.push.password
must both be set, not null.