Filter
Top Products
Start sending email — Connect the handheld to your PC
Installation and User’s Guide
49
3. Secure the handheld in the cradle by inserting the connector
port on the bottom edge of the handheld into the connector
prongs of the cradle and press firmly in place.
4. In the Desktop Manager, ensure that your PC recognizes a
connection with the handheld. Select Options>Serial Settings to
open the Settings window. Click Detect.
5. After connection is successful, click OK to exit the Settings
window. The Desktop Manager will show the handheld’s PIN
and Current Status in the status bar.
Note
If the password is enabled, you must enter it before you can
connect to the desktop. See page 38 for more information
on the password.
Note
The message “Handheld not found” will appear if the PC
cannot detect the handheld on a serial port.
If the handheld and charging cradle cable both appear to be
connected securely, ensure that no other devices are
sharing the serial port, such as a PCMCIA card or IrDA unit.
Ensure that there is no other connectivity software running
on your PC, and that you are not using the same port as
your mouse.