Filter
Top Products
Phone Basics
2A. Phone Basics 27
To exit Emergency mode:
ᮣ In a single motion, touch and slide to
the right to end the 911 call.
To inactivate the Emergency call back mode:
1. Touch and slide to the right to end a
911 call.
2. Call a non-emergency number. See “Making
Calls” on page 24.
3. Read the Alert notification screen.
4. Touch Yes to exit the Emergency call only mode
and return to normal device operation or
No to
remain in this mode.
Enhanced 911 (E911) Information
This device features an embedded Global Positioning
System (GPS) chip necessary for utilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
feature of your device seeks information to calculate
your approximate location. Depending on several
variables, including availability and access to satellite
signals, it may take up to 30 seconds or more to
determine and report your approximate location.
In-Call Options
To select an in-call option, touch the corresponding
onscreen button. The following options may be
available:
ⅷ Mute or Unmute to toggle the onboard microphone’s
mute state (on/off).
Ⅲ Touch Mute during a call to mute the microphone.
Ⅲ Touch Unmute to unmute the microphone.
ⅷ On or Off to route the device’s audio through the
speaker or through the earpiece.
ᮣ Move the slider to On to route the device’s audio
through the speaker. (You can adjust the speaker
volume using the volume button on the side of the
device.)
End Call
End Call
Important
Always report your location to the 911
operator when placing an emergency call.
Some designated emergency call takers,
known as Public Safety Answering Points
(PSAPs) may not be equipped to receive GPS
location information from your phone.
M800Mini.book Page 27 Thursday, September 17, 2009 1:36 PM