Filter
Top Products
75
•
If you need to re-record, say “
No
.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
5. After 10 sets of digits, the phone asks whether you want to
do more adaptation. Answer “
Yes
.”
6. Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “
Adaptation complete
”
plays through the speaker and you are returned to the
Digit
Dialing
menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Digit Dialing
➔
Reset Digits
. The phone prompts you to
confirm digit reset.
2. Press the
OK
soft key or to reset your digit adaptation,
or press the
Back
soft key or to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Sound
. The following options appear in the display:
•Prompts
— On/Off — Enables or disables audio prompts.
• Digits
— On/Off — Enables or disables digit playback.
•Names
— On/Off — Enables or disables name playback.
• Name Settings
— Lets you adjust the
Speed
(Faster or Slower)
and
Volume
(Louder or Softer) of your phone’s audio name
playback.
2. Highlight the desired option, then press .
3. Highlight the desired setting.
4. Press the
OK
soft key or to accept the new setting.
Press to discard the new setting and return to the
Voice Settings
menu.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1. From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Voice Launch
. The following options appear in the