Filter
Top Products
Push-to-Talk (PTT) 141
Answering Push-to-Talk Calls
When you receive a PTT call, you hear an incoming tone or the
phone vibrates, depending on your settings. The PTT number and
the caller's name (if available) will appear on your screen.
You may also hear the caller’s voice through the speakerphone.
Speakerphone is turned on by default for PTT calls. You can turn
the speakerphone off and listen to PTT calls through the earpiece
as you would a regular call, or you can listen through a headset.
1. Press the speakerphone button to either enable or disable
the PTT speakerphone feature.
If the PTT speakerphone is enabled, you will hear the
caller’s voice through the speakerphone on the front of the
phone.
If the PTT speakerphone is disabled, you will only hear the
caller’s voice through the earpiece.
2. Accept the incoming call. If available, the caller’s name
and PTT number also appear on the display.
3. When the caller has finished speaking, a tone sounds and
“Connected to” appears on the display.
4. Press and hold the PTT button and wait for a tone to sound
and a message (“Talking to”) to appear onscreen. Continue
the PTT call as described previously.
5. When you are ready to end the call, press .
Dialed: Indicates any outgoing calls made
from your phone
Received: Indicates any received calls that
were answered.
Missed Voice: Indicates any missed phone
calls. These are routed to your voicemail.
Outgoing: Indicates all PTT calls made.
Incoming: Indicates any incoming PTT calls
received.
Missed PTT: Indicates any missed PTT calls.