Filter
Top Products
Changing Your Settings 48
1.
In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings ➔
Set Phone
➔ Security and press the
Select soft key or the key.
The following options are available. Use the
Up
or Down
Navigation key to scroll to and set options:
Lock Phone
When the Phone lock feature is enabled, the phone is locked and
you must enter the 4- to 8-digit phone password each time the
phone is switched on.
To change the phone password, see “Change Phone Password”
on page 49.
Once the correct password has been entered, you can use the
phone until you switch it off.
The following options are available:
•
Off
: you are not asked to enter the phone password when you switch
on the phone.
•
On
: you are required to enter the phone password when you switch on
the phone.
Lock SIM Card
When the Lock SIM Card feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock code to
unlock the SIM so you can use a different SIM card.
Once you have entered the lock code, you are asked to confirm
your password. Reenter your password and press the OK soft
key.
The following options are available:
•
Off
: you can use different AT&T SIM cards on your phone.
•
On
: your phone only works with the current SIM card.
Check PIN Code
When the Check PIN Code feature is enabled, you must enter
your PIN each time you switch on the phone. Consequently, any
person who does not have your PIN cannot use your phone
without your approval.
Note:
Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
•
Off
: you must enter the PIN each time the phone is switched on.
•
On
: the phone connects directly to the network when you switch it on.
Lock Applications
Using this menu, you can lock the following categories: