Filter
Top Products
61
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can identify the
caller by the ringer type. (See “Ringer Types”on page 27.)
To select a ringer type for an entry:
1. From standby mode, press Contacts(right softkey).
2. Select the Contacts entry for which you want to set the
incoming ringer and press .
3. Press Options (right softkey) > Edit. (If selecting an email
address/a URL, just press Edit [right softkey].)
4. Scroll down to the box next to the icon and press .
5. Select your desired ringer and press . (When you highlight a
ringer type, a sample ringer will sound.)
6. Press Save (left softkey) to save the ringer type.
Secret Contacts Entries
You can hide an entry’s phone number(s) and require your lock code
to edit the entry by making it secret. The entry name is still displayed,
but the entry’s phone numbers are replaced with “<Secret>”.
To make an entry secret:
1. From standby mode, press Contacts(right softkey).
2. Scroll to the Contacts entry you want to tag as secret.
3. Press Options (right softkey) > Set Secret.
4. Enter the 4-digit lock code.
5. Select On.
To make an entry public:
1. From standby mode, press Contacts(right softkey).
2. Scroll to the Contacts entry you want to tag as public.
3. Press Options (right softkey) > Set Secret.
4. Enter the 4-digit lock code.
5. Select Off.
Tip:If you can’t recall your lock code, try using the last four digits of phone
number or 0000.
7. Contacts Directory