Filter
Top Products
Watching Video on LocationFree Player
27
You can adjust the streaming rate according to the
bandwidth available on your communications
connection. This allows you to watch video with
the optimum quality.
Normally, selecting [Auto] sets the optimal video
rate in accordance with available bandwidth.
When selecting a rate manually, note that a higher
rate results in higher picture quality, but a higher
(larger number) rate requires a larger bandwidth
and video will tend to keep stopping and starting
if there is insufficient bandwidth for the higher
rate.
1
Click [Rate] at the bottom of the window.
The [Change Rate] window appears.
2
Click a rate, and then click [OK].
Note
When you switch between [Auto] and [Manual],
change the rate from [1] or [6] to another rate, or
change from another rate to [1] or [6] while
connected, the NetAV connection may be
disconnected and then reconnected automatically
in some cases.
Adjusting the Video
Rate
Manual
Rate