Filter
Top Products
Advanced Base Station Settings
41
Setting Dynamic DNS Manually
If you want to use a Dynamic DNS service other
than the one you can set with [Easy Setup], set the
Dynamic DNS manually.
1 Enter the user name that you registered with
the Dynamic DNS service.
2 Enter the password that you registered with
the Dynamic DNS service.
3 Enter the URL for updating DNS information.
4 Enter the URL for detecting IP addresses.
5 Enter a renewal time for the IP Address
between 10 and 999 minutes.
6 Click this to save changes.
You can check whether NetAV has been set up
correctly.
1 When you click this button, a [NetAV Check]
page appears and the test begins. If [Success]
appears in the test page, click [Exit Setup] and
close the [Base Station Settings] screen. If
[Setup Incomplete] appears in the [NetAV
Check] page, read the instructions on the
[NetAV Check] page and configure the
necessary settings.
z Tip
When setting the Dynamic DNS manually, a domain
name needs to be entered after you start the NetAV test.
Follow the on-screen instructions to enter the domain
name.
NetAV Check