Filter
Top Products
108
Settings
You can configure security related settings such as setting call
barring or changing the PIN/PIN2 codes and security code for your
phone.
1. In standby mode, press @.
The main menu appears.
2. Settings Security Settings
◆ PIN Code Request: Allows you to set whether to request the
entering of your PIN code to perform verification each time a
SIM card is inserted into the phone and the power is turned on.
◆ Change PIN/Change PIN2: Allows you to change the PIN
code and PIN2 code. Set PIN Code Request to On before you
change a PIN code.
◆ Change Password: Allows you to change the security code
(page 21) required to use some functions and modify the
settings of your phone. The initial security code is 0000 or
the four-digit number you selected when you concluded your
contract.
◆ Phone Lock: Allows you to prevent another person from using
your phone without entering your security code (page 21).
There are three options to choose from for when to set the
phone lock: Phone Closed, Power Saving and Power On. To
cancel the phone lock temporarily, enter your security code and
press J (OK). To cancel the lock, cancel the phone lock
temporarily and then set it to Off.
◆ Reject Calls: Allows you to set the conditions for rejecting
incoming calls.
◆ Reject Addresses: Allows you to add up to 50 email
addresses or phone numbers to the Rejection list to reject the
reception of messages from those email addresses or phone
numbers.
◆ Fixed Dialling No.: Allows you to restrict the making of calls
and sending of messages to up to 40 phone numbers in the
Fixed Dialling Number list of the SIM card.
Security Settings
The fixed dialling number function is unavailable for some SIM
cards.
Note