A SERVICE OF

logo

Open as PDF
next previous
Usage
Information
You can configure all the data queues. For S6000, you can configure queues 0-7.
The following table describes the mapping between the threshold weight of the
shared buffer on the queue and the percentage of available shared buffer that is
used by the queue for each of the corresponding threshold weights of the shared
buffer:
shared-threshold-weight on the queue % of available shared buffer that
can be consumed by the queue.
0 No dynamic sharing; shared buffer
= 0.
1 0.77%
2 1.54%
3 3.03%
4 5.88%
5 11.11%
6 20%
7 33.33%
8 50%
9 66.67%
10 80%
11 88.89%
Example
Dell(conf-if-te-1/8)#Service-class buffer shared-threshold-
weight queue5 4 queue7 6
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
S6000
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unitnumber
(OPTIONAL) Enter the keyword stack-unit then the stack-
unit slot number.
Quality of Service (QoS)
1283