Version Description
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
S6000
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id then a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-
name
(OPTIONAL) Enter the keyword name then the name
configured for the VLAN. Only information on the VLAN
named is displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.1.(0.0) Updated to support OpenFlow.
936
Layer 2
