Related
Commands
default-gateway— Configure the IP address for the default gateway.
interface_management_ethernet_ip_address — Assign an IP address to the
Management Ethernet interface.
show interface management ethernet
Display the IP address configured for the Management interface.
S6000
Syntax show interface management ethernet
Command
Modes
BOOT_USER
Command
History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.133.17/24
BOOT_ADMIN #
On the S6000, the output of this command includes the MAC address and port
number of the assigned management port.
Example
BOOT_ADMIN # show int man eth
Management ethernet IP address: 10.16.132.4/16
BOOT_ADMIN #
Related
Commands
interface_management_ethernet_ip_address — Assign an IP address to the
Management Ethernet interface.
reload — Configure speed, duplex, and negotiation settings for the management
interface.
show serial console baud rate
Use the show serial console to show the values of the serial console baud rate.
S6000
Syntax show serial console baudrate
Command
Modes
BOOT_USER
Boot Command Line Interface
333
