Dolphin® 9500 Series User’s Guide Rev A
5/15/07
8 - 11
Using the Status Icon
You access the 802.11b Settings by tapping the Status icon once on the Today screen . The following menu pops up:
Note: The Status Icon changes to a crossed lock as a warning that you may have entered a wrong key (WEP Key mismatch)
for the WEP-On AP or a station.
Menu Option Description
Wireless Radio On
Turns on the radio. LED is on and the Link Icon displays with signal strength.
Wireless Radio Off Turns off the radio. A pop-up window will ask for your confirmation. If confirmed,
the LED will be off and the Status icon will change color from green to red on the
top without signal strength displayed. The WLAN card/module will stop functioning.
Remove Status Icon Removes the Status Icon from the bottom tray. A pop-
up window asks you to confirm. Click Yes to confirm,
or No to cancel.
If confirmed, the Status icon does not display in the
task tray, and you will need to go to Start > Settings >
Connections tab > 802.11b Settings in the future.
Wireless Network Status Opens the Status tab.
Configuration Opens the Config tab.
Advanced Configuration Opens the Advanced tab.
Version Information Opens the About tab.
