Dolphin® 9500 Series User’s Guide Rev A
6/8/07
1 - 1
1
Agency Approvals
The Dolphin 9500 Series consists of the following terminals:
Dolphin 9500 For details, see Dolphin 9500 on page 3-6.
Dolphin 9550 For details, see Dolphin 9550 on page 3-8.
Dolphin 9501 For details, see Dolphin 9501 Side Panel on page 11-2.
Dolphin 9551 For details, see Dolphin 9551 Side Panel on page 11-4.
Compliance Label Locations
Dolphin terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with
any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow.
Please read these guidelines carefully before using your Dolphin mobile computer.
Laser Safety Label
If the following label is attached to your product, it indicates the product
contains a laser engine or laser aimer:
Laser Eye Safety Statement: This device has been tested in accordance with
and complies with EN60825-1: 1993+A1+A2 and 21 CFR 1040.10 and
1040.11, except for deviations pursuant to Laser Notice No. 50, dated July 26,
2001. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PROD-
UCT, 1.0 mW MAX OUTPUT: 650nM.
Caution-use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
LED Safety Statement
This device has been tested in accordance with IEC60825-1 LED safety, and has been certified to be under the limits of a Class
1 LED device.
Dolphin 9500
Dolphin 9550
Dolphin 9501/9551
Embedded Safety Information Text
Dolphin 9501/9550/9551 terminals have the following safety
information embedded in the plastic in different locations on the
terminal:
Compliance
Label
Laser Safety Label
Embedded safety
information
Compliance
Label
Laser Safety
Label
Embedded safety
information
Laser Safety and
Compliance Label
FOR HOME OR OFFICE USE
Tested to Comply With FCC Standards
This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numerique de la
Classe B est conforme a la norme NMB-003 du Canada.
No user serviceable parts. Opening voids warranty
US and foreign patents pending.
Made in USA of US & imported parts.
LASER LIGHT. DO NOT STARE INTO BEAM
1.0 mW MAX OUTPUT: 650nM
IEC60825-1:1993+A1+A2
CLASS 2 LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.1 1
except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001.
