A SERVICE OF

logo

Open as PDF
next previous
Power Over Ethernet (PoE/PoE+) Operation
Configuring PoE Operation
Changing the Threshold for Generating a Power Notice
You can configure one of the following thresholds:
■ A global power threshold that applies to all modules on the switch.
This setting acts as a trigger for sending a notice when the PoE power
consumption on any PoE module installed in the switch crosses the
configured global threshold level. (Crossing the threshold level in
either direction—PoE power usage either increasing or decreasing—
triggers the notice.) The default setting is 80%.
■ A per-slot power threshold that applies to an individual PoE module
installed in the designated slot. This setting acts as a trigger for
sending a notice when the module in the specified slot exceeds or
goes below a specific level of PoE power consumption.
11-15