----- ---------- -------- ------- -------
Redundancy (Switches 8200zl)
Displaying Management Information
Standby Console> show flash
Image Size(Bytes) Date Version Build #
Primary Image : 7493854 03/21/07 K.12.XX 1617
Secondary Image : 7463821 03/05/07 K.12.XX 351
Boot Rom Version: K.12.03
Default Boot : Primary
Will boot from primary flash
on the next boot.
Figure 15-20. Example of Show Flash Command for Standby Module
Show Version
You can display the version information on the standby module, as shown in
Figure 15-21. The Boot Image field displays which flash image was last booted
from, even if the boot set-default command has been set to change the flash
booted from on the next boot. Unlike executing the show version command
on an active management module, this only shows the running version of
software on the standby management module.
Standby Console> show version
Image stamp: /sw/code/build/btm(t2g)
Mar 21 2007 15:03:31
K.12.XX
1617
Boot Image: Primary
Was booted from
primary flash.
Figure 15-21. Example of Show Version Command for Standby Module
15-28
