Monitoring and Analyzing Switch Operation
Traffic Mirroring
Use the following show commands to display information about:
■ A classifier-based mirroring configuration (show class and show policy)
■ Statistics on one or more mirroring policies (show statistics policy)
■ Hardware resources used by all mirroring policies currently configured
on the switch (show policy resources).
Syntax: show class < class-name >
Displays the configuration of the specified traffic class,
including all match/ignore statements used to classify the
packets to be mirrored.
ProCurve(config)# show class ipv4 AdminTraffic
Statements for Class ipv4 "AdminTraffic"
10 match ip 15.29.16.1 0.63.255.255 0.0.0.0 255.255.255.255
20 match ip 0.0.0.0 255.255.255.255 15.29.16.1 0.63.255.255
Figure B-42. “show class” Output for a Mirroring Policy
Syntax: show policy < policy-name >
Displays the specified policy configuration, including the
traffic classes and action commands used to mirror inbound
traffic to previously configured destination devices.
ProCurve(config)# show policy MirrorAdminTraffic
Statements for Policy "MirrorAdminTraffic"
10 class ipv4 "AdminTraffic" action mirror 3
Figure B-43. “show policy” Output for a Mirroring Policy
B-83
