AT&T A837 Rugby Cell Phone User Manual


 
My Stuff 100
Alarm 4
: fourth alarm setting.
Auto Power-up
: the alarm rings even when the phone is
turned off.
4. Select an alarm type and press Options Select or the
key. The options available are: Select and Create.
Select the alarm, and press the key.
5. Set the following options:
Name
: allows you to use a specific name for the alarm. The name
displays on the screen when the alarm activates. Does not display if
the alarm type is Wake-up Alarm.
Alarm Activation
:
On
actives the feature and
Off
deactivates the
feature. Select
On
to edit the remaining fields.
Alarm Time
: use the alphanumeric keypad enter a time for the
alarm to sound.
Note:
Your phone is preset to a 12-hour format. To change the time format,
see “Time & Date” on page 137.
Alarm Type
: press the key to select a new type of alert
notification (Melody, Increasing Melody, Vibration, Vibration then
Melody, Vibration & Melody, or Vibration & Increasing Melody)
Alert Tone
: press the key to select a tone from one of the
Audio folders.
Alarm Volume
: press the
Left
and
Right
Navigation key to adjust
the volume level (1-7).
Recurrence
: press the key to access the Recurrence menu.
Highlight an occurrence of the day(s) you want the alarm to sound.
Press the key to select the day entry. Press the
OK
soft key to
save your settings.
Snooze
: use this option to set the snooze feature for the alarm (Off,
1 Min, 3 Min, 5 Min, 7 Min, or 10 Min).
Repeat
: sets the number of times this alarm repeats (1 Time,
2 Times, 3 Times, 5 Times, or 10 Times). Snooze must be turned
on to enable this feature.
6. Press the key to save the changes.
Note:
To stop the alarm when it rings, open the phone and press any key or
press the volume keys. Press OK soft key to turn off the alarm.
Setting Auto Power-up Alarms
You can set the phone to ring the alarm when the time for an
alarm comes, even if the phone is switched off.
1. In Idle mode, press Menu My Stuff and press the
Select soft key or the key.
2. Highlight Tools Alarms and press the Select soft key or
the key.
3. Select Auto Power-up and press the key.
A837.book Page 100 Wednesday, July 23, 2008 3:28 PM