BenQ S700 Cell Phone User Manual


 
144 Menus
3. Connect the phone to your computer using the phone's USB
data cable. Plug the data cable's bigger connector into a PC COM
port, and the smaller one into the data cable jack at the bottom
left of your phone.
If your computer's operating system is Windows 98, you must
first install the data cable driver onto your computer. The data
cable driver is stored in the CD that is packed with your phone.
When plugging the data cable connector into the phone, please
be sure that the side showing "UP" faces upward.
4. Your computer will detect the data cable connected to the phone,
and then a removable disk drive will be created to represent the
miniSD card's storage capacity.
The files on the miniSD card are stored according to their type in
the disk drive's four folders--Image, Music, Video, Java. Now
you can start to transfer files using the Copy/Paste commands.
When copying a file from your computer to the miniSD card, you
must place the file in the folder intended for this type of file. For
example, an image file must be placed in the Image folder in
order to be used in the phone's menu: Media Center > Image.
PC Sync. & Modem
You can synchronize the phone with your computer using the USB
data cable to transfer data.
Besides, the phone can work as a modem to let you connect your
computer to the Internet.
Follow the steps below:
1. Before start to perform data synchronization or the modem
function, make sure you have installed onto your computer the
software tool designed for use with the phone.