Filter
Top Products
157
SETTINGS & TOOLS
Phone Only: Allows you to edit the Lock Code for the handset
only.
Calls & Services: Allows you to edit the Lock Code for all Calls &
Services.
5. Enter the new four-digit code in the Enter New Code field.
If you selected Calls & Services in step 4, you would also need to
enter the current code before entering the new code.
6. Press the Directional Key down to advance to the Re-enter
New Code field.
7. Enter the new four-digit code again as confirmation.
8. Press the Center Select Key [SET].
NOTE
There are two Lock Codes: Phone Only and Calls & Services.
Restrictions
Use the following procedure to configure Location Setting, Calls,
Messages, and Dial-Up Modem restrictions.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings, Security.
2. Enter the four-digit Lock Code. The default Lock Code is the last 4
digits of your mobile telephone number.
3. Press Restrictions.
4. Enter the four-digit Lock Code.
5. Select one of the following settings and then press the Center
Select Key [OK].
Location Setting: Unlock Setting/Lock Setting
Calls: Incoming Calls/Outgoing Calls
For Incoming Calls, set Allow All/Contacts Only/Block All.
For Outgoing Calls, set Allow All/Contacts Only/Block All.
I