Filter
Top Products
30
Getting Started with Your Phone
2. Insert your finger in the groove and pull up
on the battery cover in the direction of the
arrow .
3. Remove the battery by pulling the tab up.
4. Carefully press the memory card into
the memory card slot until it locks
into place.
5. Install the battery and replace the battery cover ensuring that you
slide the Battery Cover Lock to the LOCK position.
For information on how to install the battery and the battery cover, refer to
steps 3 through 6 of “Installing the Battery” on page 21.
Removing a Memory Card
Warning!
Never remove a memory card from the handset while it is being
accessed. Doing so can damage the memory card or the data
stored on it.
The memory card is very small. Make sure you do not drop it.
Failure to completely reseal the battery cover after removing may
result in damage if the handset is exposed to water.
•
•
•
•