Filter
Top Products
Not for commercial use
– Ericsson Inc.
0HQX'HVFULSWLRQV
Speaker Volume
SpeakerVol allows you to select the speaker volume of
handsfree accessories.
Ring Pulse
Ring Pulse allows you to choose the type of tone for the
ring pulse in Phone Mode. Each tone is demonstrated as
you scroll through the selections. There is also a System
Set selection, which is controlled by the system.
Ring Pitch
Ring Pitch allows you to adjust the ring pitch from Low,
Medium, High, or Mixed, and demonstrates those tones
as you scroll through the selections in Phone Mode.
There is also a System Set selection, which is controlled
by the system.
Ring Volume
Ring Volume allows you to set the level of the ring vol-
ume from Extra Low, Low, Medium, High, Escalating,
or Off in Phone Mode. The Escalating volume setting
rises in steps from the lowest to the highest level as the
terminal continues to ring.
Alert
Alert allows you to set the sound, vibrator, or both for
incoming call notification.
Call Data Menu
The CALL DATA Menu contains the following choices
for providing information on calls that have been made
from or received by the terminal.
ReceiveLog
If you have Caller ID from your service provider, this
menu lists the last 40 calls received with caller ID (the
latest call appears first). Press
<(6
to dial a number
shown in the display.
Note! The Auto Area feature does not insert the area code in a
phone number shown in the display by ReceiveLog.
Use the arrow keys to scroll through the list of received
calls. If the received number is stored in memory with a
name, the name is also shown in the display.
Last Time
The Last Time function indicates the approximate dura-
tion of the last call, in minutes and seconds.
Elapsed
The Elapsed time meter shows the hours and minutes
that have been used. The elapsed time cannot be reset.
Press
12
to exit.
Call Count
The Call Count function indicates the total number of
calls made from the current phone number shown in the
Ditto Lornetta.book Page 54 Thursday, July 13, 2000 3:55 PM