Filter
Top Products
4-29
Displaying EGC closed network ID (ENID)
To join a FleetNET
TM
service, an MES must be registered with an
information provider. The information provider adds the MES to the
group which is to receive the service by downloading a Group Call
ID, via a LES which supports FleetNET
TM
broadcasts, uniquely ad-
dressed to the MES. The MES stores the ID and can accept broad-
casts from the information provider. The MES operator can not change
this stored EGC closed network IDs (ENIDs). Up to 64 ENIDs are
stored on a non-volatile memory.
The ENID stored can be accessed for downloading and deleting via
the satellite path. It is possible for an MES operator to inhibit (or
activate as required), via the DTE, selected ENIDs previously down-
loaded.
Along with the ENID, the name of the information provider is stored.
In the event that a download command is received and the ENID
storage area is full, then an ENID which has been inhibited (de-acti-
vated) by the MES operator will be written over. If none has been
inhibited, then the new download is not accepted.
Follow the procedure below to inhibit (or activate) an ENID.
1. Press [F4] to display EGC menu.
2. Press [2] to display the EGC Network ID List.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
SYNC ( NCS )
NCS: IOR LOGIN
97-02-28 12:00 (UTC)
LAT: 34:43.00N
LON: 135:21.00E
1. Display EGC Message
2. EGC Network ID
EGC
ENT: Activate SPACE: Inhibit Ctrl+P: Print ESC: Quit
Mark ‘*’ means activation
01
02
03
04
05
06
07
08
*
*
*
*
*
*
*
*
00001
00002
04001
04002
04003
04005
04006
04007
202
202
202
202
202
202
202
202
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
FURUNO
EGC Network ID List
Current State: IDLE
DCE Ver **
Figure 4-40 EGC network ID list