Filter
Top Products
36 Accessory Settings
Ensuring Call Privacy
You can set your phone to sound an alert if
enhanced CDMA voice privacy is lost or regained
(check with your service provider to see if CDMA
voice privacy is enabled in your area). When voice
privacy is activated during a call, you will see a
message and on your screen.
To set this alert:
•Select
Menu → Settings → Network →
Privacy Alert → Enabled.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.) in
markets where service has been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu → Settings → Network →
Location.
2. Select 911 Only or Location On.
– 911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
–
Location On shares your position
information with your service provider’s
network in addition to emergency
services.
Accessory Settings
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Enter from
your keypad.
3. Select the TTY option.
4. Press to clear the message.
5. Highlight an option and press .
Note: TTY/TDD service may not be available.
Check with your service provider for more
information.
Using a Hearing Aid device
You can reduce interference while using the
phone with a hearing aid device by activating the
phone's T-Coil HAC feature.
Note: Enable this
feature only when using the phone with a hearing
aid device.
1. Select Menu → Settings → Call Settings →
Hearing Aid.
2. Select On and then press .
82-G1710-2EN.book Page 36 Tuesday, October 3, 2006 9:45 AM