Filter
Top Products
User Guide for the Kyocera K132 Phone 39
Waking up the phone
If your phone is connected to a portable hands-
free car kit, you can use a voice command to
activate the phone to make a call.
Note: Voice Wake-up does not work with
Keygaurd active. To disable Keygaurd, see
“Locking your phone” on page 34.
To activate the Voice Wake-up setting:
•Select
Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
To wake up the phone:
1. Say Wake Up and listen for a tone.
2. Say Wake Up again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 40.
Answering the phone
You can set the portable hands-free car kit to
either (1) answer automatically or (2) answer
using a voice command.
Answering automatically
•Select Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.
Note: This setting also works with the portable
hands-free car kit.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed Kyocera hands-free car kit.
To turn off Auto-Answer:
•Select
Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
1. Select Menu → Settings →
Voice Features
→ Voice Answer → Enabled.
2. Select Menu → Settings → Silent Mode →
Normal Sounds.
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
saved contact entry, then the phone says
“Incoming call from (Name), answer?”
•Say
Yes or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
•Say
No and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
82-G1710-2EN.book Page 39 Tuesday, October 3, 2006 9:45 AM