Kyocera K312 Cell Phone User Manual


 
44 Using Voice Recognition
Erasing voice tags
To erase all voice name dial recordings in
your phone:
1. Menu Settings Voice Features
Erase Voice Dial.
2. Select Yes.
Making a call using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press . The phone
responds: “Say a name or say Dial.”
2. Say “Dial”. The phone responds:
“Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
–Say
Clear” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “
Yes to clear or “No” to cancel.
–Say Call to dial the number.
–Say
Verify” to cause phone to repeat the
set of digits that you input.
–Say
Cancel” to exit voice recognizer and
return to the home screen.
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note: The following features apply only to
installed hands-free car kits unless noted.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice
command to activate the phone to make a
phone call.
To activate the Voice Wake-up setting:
•Select
Menu Settings
Voice Features Voice Wake-Up
With accessory.
82-G1859-1EN.book Page 44 Friday, December 8, 2006 2:39 PM